Crius ftdi basic breakout 5v usb to ttl 6 pin module for mwc multiwii lite se купить

crius ftdi basic breakout 5v usb to ttl 6 pin module for mwc multiwii lite se



HJ FTDI Basic Breakout 5V USB to TTL 6-Pin Module for MWC MultiWii Lite / SE - Blue HJ FTDI Basic Breakout 5V USB to TTL 6-Pin Module for MWC MultiWii Lite / SE - Blue Новинка

HJ FTDI Basic Breakout 5V USB to TTL 6-Pin Module for MWC MultiWii Lite / SE - Blue

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.
USB to TTL Converter Module for FT232 FTDI MWC Multiwii Arduino with 6P DuPont Line USB to TTL Converter Module for FT232 FTDI MWC Multiwii Arduino with 6P DuPont Line Новинка

USB to TTL Converter Module for FT232 FTDI MWC Multiwii Arduino with 6P DuPont Line

USB to TTL Converter Module for FT232 FTDI MWC Multiwii Arduino with 6P DuPont Line Description: Item Name:USB to TTL Converter Module Usage:Compatible with FT232,for debugging FTDI,MWC,Multiwii,Arduino, Bluetooth module, MiniOSD, Support:5.5V and 3V device USD to TTL Driver.zip Package Included: 1x USB to TTL Converter Module 1x 6P DuPont Line
FTDI Basic Breakout USB to TTL Upload Tool for MWC for Arduino (Works with Official Arduino Boards) FTDI Basic Breakout USB to TTL Upload Tool for MWC for Arduino (Works with Official Arduino Boards) Новинка

FTDI Basic Breakout USB to TTL Upload Tool for MWC for Arduino (Works with Official Arduino Boards)

Model N/A Quantity 1 Color Black Material PCB Features FTDI basic 5V USB to TTL upload tool can be connected with MultiWii flight control board directly easy to upgrade or modify Application DIY project Packing List 1 x USB to TTL board 1 x USB cable (31cm)
Crius FTDI Basic Breakout 5V USB to TTL 6-Pin Module for MWC MultiWii Lite / SE Crius FTDI Basic Breakout 5V USB to TTL 6-Pin Module for MWC MultiWii Lite / SE Новинка

Crius FTDI Basic Breakout 5V USB to TTL 6-Pin Module for MWC MultiWii Lite / SE

Brand Crius Model V1.0 5V Quantity 1 Color Blue Material PCB Features The newest version Specification 6-Pin 3.3 5V Application MWC MultiWii Lite / SE English Manual/Spec N/A Other A product for Arduino that works with official Arduino boards. This is the newest revision of our FTDI BASIC; It now uses a SMD 6-pin header on the bottom which makes it smaller and more compact; Functionality has remained the same; This is a basic breakout board for the FTDI FT232RL USB to serial IC; The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards; It can also be used for general serial applications; The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable; The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded; This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button; This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector; The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable; The black wire on the FTDI cable is GND green is CTS; Use these BLK and GRN pins to align the FTDI basic board with your Arduino target; This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working; This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!); Our Arduino Pro boards and LilyPads use this type of connector; One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level); This board ship default to 5V but you can cut the default trace and add a solder jumper if you need to switch to 3.3V; Document: Windows 32/64 drive: http://www.ftdichip.com/Drivers/VCP.htm; 2. Arduino: http://arduino.cc/en/Main/Software; 3. the latest edition of MWC firmware and the configuration process: http://code.google.com/p/multiwii/downloads/list; 4. JAVA official website: http://java.com/zh_CN/download/manual.jsp?locale=zh_CN Packing List 1 x Module
3.3V ~ 5V USB to TTL FT232RL Module for FTDI MWC Debugger 3.3V ~ 5V USB to TTL FT232RL Module for FTDI MWC Debugger Новинка

3.3V ~ 5V USB to TTL FT232RL Module for FTDI MWC Debugger

Color Deep Blue Brand N/A Model USB to TTL Quantity 1 Piece Material PCB English Manual / Spec No Other Features FTDI FT232RL chipset Leads to the FT232RL chip signal port TTL / CMOS level RXD / TXD transceiver communication indicator Powered by USB port 5V or 3.3V optional Perfect for your Funduino DIY project. Packing List 1 x Module
CRIUS CO-16 OLED Display Module V1.0 CRIUS CO-16 OLED Display Module V1.0 Новинка

CRIUS CO-16 OLED Display Module V1.0

CRIUS CO-16 OLED Display Module V1.0 For MWC MultiWii Flight Control
CRIUS MultiWii MWC I2C-GPS NAV Navigation GPS Adaption Board for 328P MWC Flight Controller CRIUS MultiWii MWC I2C-GPS NAV Navigation GPS Adaption Board for 328P MWC Flight Controller Новинка

CRIUS MultiWii MWC I2C-GPS NAV Navigation GPS Adaption Board for 328P MWC Flight Controller

Features: - All GPS data available via the I2C bus to connect to 328P Multiwii FC - A LED on board show GPS 3D Fix status - ATMega 328P Microcontroller - 2 Molex 1.25mm 4Pin socket for GPS receiver and FC - 2 port for ISP and FTDI
FTDI Basic Program Downloader USB-TTL 3.3 / 5V FT232 For Arduino FTDI Basic Program Downloader USB-TTL 3.3 / 5V FT232 For Arduino Новинка

FTDI Basic Program Downloader USB-TTL 3.3 / 5V FT232 For Arduino

FTDI Basic Program Downloader USB-TTL 3.3 / 5V FT232 For Arduino Features: 1. Standard interface, compatible with a variety of official Arduino controller 2. Original FT232 chip, stable performance 3. With indicator indicates power, sending and receiving, the working status can be seen clearly 4. 3.3V / 5V (Optional) 5. Can be used as an ordinary USB to serial TTL module and download STC microcontroller 6. Size: 4.5 x 1.8 x 0.6cm (L x W x H) 7. Mini USB Cable length: 25cm / 9.8inch Driver download: http: //www.ftdichip.com/Drivers/VCP.htm Direct Download (for x86): http: //www.ftdichip.com/Drivers/CDM/CDM20802%20WHQL%20Certified.zip Package included: 1 x FTDI Basic Program Downloader USB-TTL 1 x USB2.0 to Mini USB Cable
FT232RL FTDI USB To TTL Serial Converter Adapter Module For Arduino FT232RL FTDI USB To TTL Serial Converter Adapter Module For Arduino Новинка

FT232RL FTDI USB To TTL Serial Converter Adapter Module For Arduino

FT232RL FTDI USB To TTL Serial Converter Adapter Module For Ardui is available now from our UK warehouse Free shipping to UK in 3-6 business days ship to other European countries in 7-10 days FT232RL FTDI USB To TTL Serial Converter Adapter Module For Arduino Feature: Chip: FT232RL Draw out all signal port of FT232RL chip RXD / TXD transceiver communication indicator USB power supply, can choose 5V or 3.3V, set by jumper With over current protection, using 500mA self-restore fuse Pin definition: DTR, RXD, TX, VCC, CTS, GND Pitch: 2.54mm Size: 36 x 18mm (L x W) Interface: Mini USB Note: This chip is not orignal, do not have EEPROM, can not invert the signals. Package included: 1 x FT232RL USB to serial converter module
Geeetech MWC MultiWii SE V2.0 Standard multi-Copter 4-axis Main Flight Control - Red Geeetech MWC MultiWii SE V2.0 Standard multi-Copter 4-axis Main Flight Control - Red Новинка

Geeetech MWC MultiWii SE V2.0 Standard multi-Copter 4-axis Main Flight Control - Red

MWC is MultiWii Copter abbreviationthrough the MWC program to control the hardware platform can achieve a variety of multi-spindle high-quality flight resultsWith the same program for the open source compared to other pilot productsflight skills required for novice lower debugging process more intuitive. MWC SE in addition to the necessary input / output ports but also allow a variety of expansion interfaces can be used for OSD module LCD liquid crystal module Bluetooth module the data transmission module GPS module satellite receiver 3-axis head and other equipment connection. MultiWii SE Hardware configuration: - ATMEGA328P microcontroller - ITG3205 3-axis gyroscope - BMA180 3-axis accelerometer - BMP085 pressure sensor - HMC5883L 3-axis Magnetometer
CRIUS CN-06 Standalone GPS Receiver V2.0 and 12C-GPS NAV Module Navigation Board CRIUS CN-06 Standalone GPS Receiver V2.0 and 12C-GPS NAV Module Navigation Board Новинка

CRIUS CN-06 Standalone GPS Receiver V2.0 and 12C-GPS NAV Module Navigation Board

Brand CRIUS Model CN-06 12C Quantity 1 Piece(s)/pack Color Green Blue Material aluminium alloy Compatible device compatible Functions GPS receive navigation Other Feature GPS receiver and NAV module weight: 30g Keywords GPS receiver V2.0; Standalone GPS receiver; ·u-blox NEO-6M GPS module; ·EEPROM for save configuration permanently; ·Build in 25X25mm active antenna; ·UART (TTL) port with EMI protection; Default parameter; ·Baud rate : 9600; NAV module: All GPS data available via the I2C bus to connect to 328P Multiwii FC; A LED on board show GPS 3D Fix status; ATMega 328P Microcontroller; 2 Molex 1.25mm 4Pin socket for GPS receiver and FC; 2 port for ISP and FTDI; Packing List 1 x CRIUS GPS receiver (including one 25cm cable) 1 x CRIUS NAV Module (including two 25cm cables and one connecting needle)
I2C-GPS NAV Module Navigation Adapter Board - Blue I2C-GPS NAV Module Navigation Adapter Board - Blue Новинка

I2C-GPS NAV Module Navigation Adapter Board - Blue

Quantity 1 Piece Color Blue Material PCB Compatible device CRIUS / MultiWii / MWC Functions I2C- GPS NAV navigation pad allows any use GPS fixed-point auto return and automatic waypoint flight 328P of the MWC based flight control functions Features All GPS data available via the I2C bus to connect to 328P Multiwii FC; A LED on board show GPS 3D Fix status; ATMega 328P Microcontroller; 2 Molex 1.25mm 4Pin socket for GPS receiver and FC; 2 port for ISP and FTDI Packing List 1 x I2C-GPS board 1 x 4-pin connecting cable A (100mm) 1 x 4-pin connecting cable B (200mm)
CRIUS MWC MultiWii SE V2.5 Version Multi-Copter 4-Axis Main Flight Control Board - Blue CRIUS MWC MultiWii SE V2.5 Version Multi-Copter 4-Axis Main Flight Control Board - Blue Новинка

CRIUS MWC MultiWii SE V2.5 Version Multi-Copter 4-Axis Main Flight Control Board - Blue

Brand CRIUS Quantity 1 Piece(s)/pack Color Blue Material PCB Compatible device Remote control aircraft Functions Keep the airplane stable Other Feature Small size 35 x 35mm mounting holes; 6 PWM input channels for standard receiver or PPM SUM receiver; Up to 8-axis motor output; Supports 2-axis gimbal and auto trigger control; FTDI / UART port for upload firmware debug Bluetooth module or LCD display; I2C port for extend sensor I2C LCD / OLED display or I2C-GPS NAV board for GPS and Sonar; Ultra low noise 3.3V LDO voltage regulator; ATMega 328P Microcontroller; MPU6050C 6 axis gyro/accel with Motion Processing Unit; HMC5883L 3-axis digital magnetometer; BMP085 digital pressure sensor; PCA9306DP1 logic level converter; Dimension: 40mm x 40mm; Height: 11.6mm; Weight: 9.1g; Fixing hole spacing: 35mm (It can be changed to 45mm by CRIUS distribution board); Hole diameter: 3.1mm Packing List 1 x SE V2.5 flight control board 2 x 3-pin to 1-pin x 3 cables (110mm) 1 x 3-pin to 3-pin cable (110mm)
FT232RL USB to TTL Module Board for Arduino - Red (Works with official Arduino Boards) FT232RL USB to TTL Module Board for Arduino - Red (Works with official Arduino Boards) Новинка

FT232RL USB to TTL Module Board for Arduino - Red (Works with official Arduino Boards)

Adopts FT232RL chip of FTDI company; TTL/CMOS level; RXD / TXD indicator; USB powered 5V / 3.3V for choice.
MWC MultiWii SE V3.0 Standard Edition Flight Control Board + RC Airplane H-8123 GPS Receiver Module MWC MultiWii SE V3.0 Standard Edition Flight Control Board + RC Airplane H-8123 GPS Receiver Module Новинка

MWC MultiWii SE V3.0 Standard Edition Flight Control Board + RC Airplane H-8123 GPS Receiver Module

Brand no Model SE V3.0 H-8123 Quantity 1 Piece(s)/pack Color Blue Material aluminium alloy hard plastic Compatible device 3 axis Functions flight control GPS Keywords MWC MultiWii SE V3.0 Standard Edition Flight Control Board + RC Airplane H-8123 GPS Receiver Module Other Feature MWC V3.0Better six-axis gyroscope/accelerator sensor; Special I2C level to IC; With I2C(5V Level) interface could connect I2C-GPS navigation board/OLED monitor etc; With FTDI protection avoiding conflict between external power supply and USB power supply; Hardware Features: Chip: ATMega328P; BMP085 digital barometric sensor; HMC5883L three-axis magneto resistive sensor; Segregate dual channel power regulator 3.3V/5V Max. Current 150mA/500mA; Dual channel power indicator LED 3.3V red/5V green; High brightness status indicator LED; Special I2C level to IC; FTDI interface with diode protection and 500mA current limit fuse; GPS: Main chip: U-Blox G6100; C/A 1.023MHZ bit stream; Receive frequency range:L1[1575.42MHz]; Receive channel: 50CH; GPS Function: Packing List 1 x V3.0 flight controller 1 x H-8123 GPS
CN-06 GPS Receiver Super U-blox GPS Module w/ Active Ceramic Antenna MWC CN-06 GPS Receiver Super U-blox GPS Module w/ Active Ceramic Antenna MWC Новинка

CN-06 GPS Receiver Super U-blox GPS Module w/ Active Ceramic Antenna MWC

Model N/A Quantity 1 Piece Color Green Material PCB Compatible device Suitable for CRIUS MWC SE V0.2/V1.0 or other manufacturers R/C helicopter Functions Makes R/C helicopter has the function of the GPS fixed-point automatic return and automatic waypoint flight Features Standalone GPS receiver; U-blox NEO-6M GPS module; Build in 18X18mm active GPS antenna; UART TTL socket; Rechargeable battery for Backup Packing List 1 x GPS module 1 x 4-pin connecting cable (300mm)
Improved Pro Mini ATmega328P 5V / 16MHz Board + CH340G USB to TTL Improved Pro Mini ATmega328P 5V / 16MHz Board + CH340G USB to TTL Новинка

Improved Pro Mini ATmega328P 5V / 16MHz Board + CH340G USB to TTL

Improved Pro Mini ATmega328P 5V / 16MHz Board + CH340G USB to TTL Programmer Module for Arduino
Pro Mini ATmega328P 5V/16MHz Development Board + CH340G USB to TTL Pro Mini ATmega328P 5V/16MHz Development Board + CH340G USB to TTL Новинка

Pro Mini ATmega328P 5V/16MHz Development Board + CH340G USB to TTL

Pro Mini ATmega328P 5V/16MHz Development Board + CH340G USB to TTL Programmer Module for Arduino
CH340 DIY 5V Mini USB to TTL Board Module - Blue + Silver CH340 DIY 5V Mini USB to TTL Board Module - Blue + Silver Новинка

CH340 DIY 5V Mini USB to TTL Board Module - Blue + Silver

Brand N/A Model CH340 Quantity 1 Color Blue + silver Material PCB + components Features Board CH340 USB-RS232 converting chip Specification Board power indicator; Board USB male port convenient to connect to computer; TTL pin has been lead out; Working voltage: 5V Application DIY English Manual/Spec Yes Packing List 1 x Module
Bluetooth Data Link Board Module for MWC Multiwii Fight Controller - Blue + Green + Black Bluetooth Data Link Board Module for MWC Multiwii Fight Controller - Blue + Green + Black Новинка

Bluetooth Data Link Board Module for MWC Multiwii Fight Controller - Blue + Green + Black

Use this module to connect UART TTL interface on MWC fight controller so that you can: Read & modify all PID data; Read & modify AUX1/AUX2 switch setting; Monitor controller signal; Monitor the output signal of GPS and sensors (such as gyroscope accelerometer barometer magnetic resistance etc); Correct the magnetic resistance and accelerometer; Read and save MWC data in moile phone; Shot screen. FTDI can not be used simultaneously when this bluetooth module is connected since both of them share one UART interface. LED indicator: Green: power indicator it will be steady on when this module is turned on; Red: flickering means the module is disconnected steady means it is connected.
ChuangZhuo FT232RL USB to 6-Pin Serial Port Adapter Module Converter Downloader for Arduino - Red ChuangZhuo FT232RL USB to 6-Pin Serial Port Adapter Module Converter Downloader for Arduino - Red Новинка

ChuangZhuo FT232RL USB to 6-Pin Serial Port Adapter Module Converter Downloader for Arduino - Red

FT232RL chipset all signal ports education TTL/CMOS electrical level; RXD/TXD indicator; USB power supply selectable 5V or 3.3V port
FTDI Basic Program Downloader USB to TTL FT232 for Arduino (Works with Official Arduino Boards) FTDI Basic Program Downloader USB to TTL FT232 for Arduino (Works with Official Arduino Boards) Новинка

FTDI Basic Program Downloader USB to TTL FT232 for Arduino (Works with Official Arduino Boards)

Color Red Brand N/A Model FTDI Quantity 1 Piece Material FR4 English Manual / Spec No Other Features Standard interface compatible with a variety of official Ardui-no controller; Original FT232 chip stable performance; With power sending receiving indicator working status; With 3.3V and 5V power supply options; Do ordinary USB to serial TTL module download STC SCM ; Driver link: http://www.ftdichip.com/Drivers/VCP.htm (for x86):http://www.ftdichip.com/Drivers/CDM/CDM20802%20WHQL%20Certified.zip Datasheet: http://www.ftdichip.com/Products/ICs/FT232R.htm Packing List 1 x Module 1 x USB Cable(33cm)
MWC MultiWii SE V3.0 Standard Edition Flight Control Board (Mini R/C Aircraft Compatible) MWC MultiWii SE V3.0 Standard Edition Flight Control Board (Mini R/C Aircraft Compatible) Новинка

MWC MultiWii SE V3.0 Standard Edition Flight Control Board (Mini R/C Aircraft Compatible)

Brand N/A Model SE V3.0 Quantity 1 Piece(s)/pack Color Blue Material sluminum alloy Compatible device compatible Functions flight control Keywords MWC MultiWii SE V3.0 Standard Edition Flight Control Board Mini RC Aircraft Compatible Other Feature SE V3.0 Features: Better six-axis gyroscope/accelerator sensor; Optimize layout signal input/output interface more reasonable; Special I2C level to IC; With I2C(5V Level) interface could connect I2C-GPS navigation board/OLED monitor etc; With FTDI protection avoiding conflict between external power supply and USB power supply; Small size could mount on mini aircraft 31mm install pitch; Hardware Features: MPU6050 digital three-axis gyroscope and three-axis accelerator; Chip: ATMega328P; BMP085 digital barometric sensor; HMC5883L three-axis magneto resistive sensor; Segregate dual channel power regulator 3.3V/5V Max. current 150mA/500mA; Dual channel power indicator LED 3.3V red/5V green; High brightness status indicator LED; Special I2C level to IC; FTDI interface with diode protection and 500mA current limit fuse Packing List 1 x Flight Control Board 2 x Pins
FT232RL USB to Serial 232 TTL Adapter Module for Funduino - Blue (3.3~5V) FT232RL USB to Serial 232 TTL Adapter Module for Funduino - Blue (3.3~5V) Новинка

FT232RL USB to Serial 232 TTL Adapter Module for Funduino - Blue (3.3~5V)

Color: Blue - Material: PCB + metal - FTDI FT232RL chipset - Leads to the FT232RL chip signal port TTL / CMOS level - RXD / TXD transceiver communication indicator - Powered by USB port 5V or 3.3V optional - Perfect for your Funduino DIY project - Driver link: http://www.ftdichip.com/Drivers/VCP.htm - (for x86):http://www.ftdichip.com/Drivers/CDM/CDM20802%20WHQL%20Certified.zip - Datasheet: http://www.ftdichip.com/Products/ICs/FT232R.htm
CRIUS Distribution Board for SE v0.2 / v1.0 / MWC - Black CRIUS Distribution Board for SE v0.2 / v1.0 / MWC - Black Новинка

CRIUS Distribution Board for SE v0.2 / v1.0 / MWC - Black

Quantity 1 Piece Color BlueBlack Material PCB Compatible device SE v0.2 / v1.0 / MWC Functions Compatible with multi-axis MWC multicopter Features Easy to use make your aircraft more beautiful Packing List 1 x Distribution board 2 x 14AWG silicone cables (10cm/ red / black) 2 x Tubes (1.8mm)
USB TO TTL UART Module Serial Converter for Geekbox USB TO TTL UART Module Serial Converter for Geekbox Новинка

USB TO TTL UART Module Serial Converter for Geekbox

USB TO TTL UART Module Serial Converter for GeekBox
RS232 USB To TTL PL2303HX Auto Converter Adapter Controller Module For Arduino RS232 USB To TTL PL2303HX Auto Converter Adapter Controller Module For Arduino Новинка

RS232 USB To TTL PL2303HX Auto Converter Adapter Controller Module For Arduino

RS232 USB To TTL PL2303HX Auto Converter Adapter Controller Module For Arduino
CRIUS Side Pin All IN ONE PRO Flight Controller V2.0 Lastest Ver Pirate / MWC / ArduPlaneNG CRIUS Side Pin All IN ONE PRO Flight Controller V2.0 Lastest Ver Pirate / MWC / ArduPlaneNG Новинка

CRIUS Side Pin All IN ONE PRO Flight Controller V2.0 Lastest Ver Pirate / MWC / ArduPlaneNG

Color Black + Dark Blue + Multi-Colored Brand ZnDiy-BRY Model All-in-one V2.0 Material PCB + plastic Quantity 1 Piece Compatible Model Flight controller Other Features With side pins; Supported MegaPirateNG / ArduCopterNG ArduPlaneNG / MultiWii / AeroQuadand firmware; Up to 8-axis motor output; 8 input channels for standard receiver and PPM SUM; 4 serial ports for debug / Bluetooth Module / OSD / GPS / telemetry; 2 servos output for PITCH and ROLL gimbal system; A servos output to trigger a camera button; 6 Analog output for extend device; A I2C port for extend sensor or device; Separate 3.3V and 5V LDO voltage regulator; Built-in 16Mbit data flash memory chip to record the data automatically; ATMega 2560-16AU Microcontroller; MPU6050 6 axis gyro / accel with Motion Processing Unit; HMC5883L 3-axis digital magnetometer; MS5611-01BA01 highprecision altimeter; FT232RQ USB-UART chip and Micro USB receptacle; On board logic level converter. Input power selection: One of the following ways; Connect 5V power cable from ESC or UBEC to the ESC/Servo port the J1 jumper must be closed. Connect 5V~12V power cable to the extend power port the J1 jumper must be removed. When using Extend Board AIO PRO must be powered from the extend power port Packing List 1 x Flight controller 1 x 3-Pin to 3-Pin cable (10cm) 3 x 3-Pin to 1-Pinx3 cables (10cm) 1 x 1.25mm 4-Pin cable (14cm) 1 x 1.25mm 6-Pin cable (14cm) 1 x 1.25mm 8-Pin cable (14cm)
TTL to RS485 Module for Arduino (Works with Official Arduino Boards) TTL to RS485 Module for Arduino (Works with Official Arduino Boards) Новинка

TTL to RS485 Module for Arduino (Works with Official Arduino Boards)

Model RS 485 Quantity 1 Color Green Material PCB Features MAX485 chipset; 5.08mm pitch 2-pin terminals for RS-485 easy communication and wiring Specification Working voltage: 5V Application Great for DIY project Packing List 1 x TTL to RS485 module for Arduino
LSON RL2303 USB to TTL Serial Board STC Microcontroller Module - Red + Black LSON RL2303 USB to TTL Serial Board STC Microcontroller Module - Red + Black Новинка

LSON RL2303 USB to TTL Serial Board STC Microcontroller Module - Red + Black

Color OthersRed + Black Brand LSON Model RL2303 Quantity 1 Piece Material PCB + electron English Manual / Spec No Other Features USB to TTL module can be used to upgrade the microcontroller program download etc. This module provides 5v and 3.3v voltage output Packing List 1 x Module
ZnDiy-BRY CRIUS All IN ONE PRO Flight Controller V2.0 Lastest Ver Pirate / MWC / ArduPlaneNG ZnDiy-BRY CRIUS All IN ONE PRO Flight Controller V2.0 Lastest Ver Pirate / MWC / ArduPlaneNG Новинка

ZnDiy-BRY CRIUS All IN ONE PRO Flight Controller V2.0 Lastest Ver Pirate / MWC / ArduPlaneNG

Color Black Blue Brand ZnDiy-BRY Model All-in-one V2.0 Material PCB + Plastic Quantity 1 Piece Compatible Model Flight Controller Other Features Supported MegaPirateNG/ ArduCopterNG,/ArduPlaneNG/MultiWii/AeroQuadand firmware; Up to 8-axis motor output; 8 input channels for standard receiver and PPM SUM; 4 serial ports for debug/Bluetooth Module/OSD/GPS/telemetry; 2 servos output for PITCH and ROLL gimbal system; A servos output to trigger a camera button; 6 Analog output for extend device; A I2C port for extend sensor or device; Separate 3.3V and 5V LDO voltage regulator; Built-in 16Mbit data flash memory chip to record the data automatically; ATMega 2560-16AU Microcontroller; MPU6050 6 axis gyro/accel with Motion Processing Unit; HMC5883L 3-axis digital magnetometer; MS5611-01BA01 highprecision altimeter; FT232RQ USB-UART chip and Micro USB receptacle; On board logic level converter. Input power selection: One of the following ways; Connect 5V power cable from ESC or UBEC to the ESC/Servo port the J1 jumper must be closed. Connect 5V~12V power cable to the extend power port the J1 jumper must be removed. When using Extend Board AIO PRO must be powered from the extend power port Packing List 1 x Flight controller 1 x 3Pin to 3-Pin cable (10cm) 3 x 3Pin to 1-Pinx3 cables (10cm) 1 x 1.25mm 4-Pin cable (14cm) 1 x 1.25mm 6-Pin cable (14cm) 1 x 1.25mm 8-Pin cable (14cm)
Crius CN-06 V2.0 Standalone U-Blox GPS Receiver Module w/ Source Antenna - Green Crius CN-06 V2.0 Standalone U-Blox GPS Receiver Module w/ Source Antenna - Green Новинка

Crius CN-06 V2.0 Standalone U-Blox GPS Receiver Module w/ Source Antenna - Green

Brand Crius Model CN-06 Quantity 1 Piece(s)/pack Color Green Material PCB Compatible device MWC flight control Functions Locates the place of the aircraft Other Feature Dimension: 28mm X 33mm x 12.5mm; Weight: 16.5g / 18.9g (included cable); Hole diameter: 3.1mm; GPS module: u-blox NEO-6M; EEPROM: 32Kbit; On board interface: Molex 1.25mm-4-pin; On board battery: SEIKO MS621FE 3V rechargeable lithium battery; Standalone GPS receiver; u-blox NEO-6M GPS module; EEPROM for save configuration permanently; Build in 25 X 25mm active antenna; UART (TTL) port with EMI protection; Rechargeable battery for backup / hot start Packing List 1 x CN-06 GPS receiver 1 x UART 4-pin cable (28cm)
PL2303HX USB to TTL RS232 Auto Converter Module Adapter w/ 4 Dupont Cables for Arduino PL2303HX USB to TTL RS232 Auto Converter Module Adapter w/ 4 Dupont Cables for Arduino Новинка

PL2303HX USB to TTL RS232 Auto Converter Module Adapter w/ 4 Dupont Cables for Arduino

Model N/A Quantity 1 Color Black Material PCB Features The USB to RS232 module based TTL provides the best and convenient way to connect your RS232 TTL Devices or demo board to your PC via the USB port. Application Great for DIY projects Packing List 1 x USB to TTL module 4 x Dupont cables (18.6cm)
Lilypad ATmega328P Wearable Development Board + CH340G USB to TTL Lilypad ATmega328P Wearable Development Board + CH340G USB to TTL Новинка

Lilypad ATmega328P Wearable Development Board + CH340G USB to TTL

Lilypad ATmega328P Wearable Development Board + CH340G USB to TTL Programmer Module for Arduino
CRIUS NEO-6 V3.0 GPS NEO-6 Module for APM MWC Pirot Rabbit Flight Controller CRIUS NEO-6 V3.0 GPS NEO-6 Module for APM MWC Pirot Rabbit Flight Controller Новинка

CRIUS NEO-6 V3.0 GPS NEO-6 Module for APM MWC Pirot Rabbit Flight Controller

Features: U-blox NEO-6M GPS module; 32k I2C EEPROM for save configuration; 5Hz update rate; Build in 25 x 25 x 4mm ceramic patch antenna; LNA and SAW chip; 3.3V LDO low noise regulator; 3V lithium Rechargeable battery; UART (TTL) port with EMI protection; Power and fix indicator LEDs; Reverse polarity protection for input power; Default parameter: Standard NMEA protocol; Nav rate: 1Hz; TIMEPULSE (fix LED) rate: 1H; Hole diameter: 3.1mm;
CH340G Serial Port Debugger USB To TTL Converter Adapter Module CH340G Serial Port Debugger USB To TTL Converter Adapter Module Новинка

CH340G Serial Port Debugger USB To TTL Converter Adapter Module

CH340G Serial Port Debugger USB To TTL Converter Adapter Module Compatible With Arduino Pro Mini
GY-81-3205 10DOF ITG3205 BMA180 HMC5883L MultiWii MWC Flight Control Module for Arduino GY-81-3205 10DOF ITG3205 BMA180 HMC5883L MultiWii MWC Flight Control Module for Arduino Новинка

GY-81-3205 10DOF ITG3205 BMA180 HMC5883L MultiWii MWC Flight Control Module for Arduino

Model GY-81-3205 Quantity 1 Color Blue Material PCB Features HMC5883L + BMA180 + ITG3205 + BMP085 module Application Measures magnetic field acceleration gyroscope atmospheric pressure Other Gyroscope chip built-in 16bit AD converter 16-bit data output; Magnetic field built-in 12bit AD converter 16-bit form data output; Acceleration built-in 14bitAD converter 16 form data output; Machine welding process to ensure quality standard 2.54mm pin spacing; Power supply: 3~5V; Communication mode: IIC standard communication protocol ( compatible with 3-5v system including the LLC circuit); Magnetic field range: +/- 0.88/1.3/1.9/2.5/4.0/4.7/5.6/8.1 gauss; Acceleration range: +/- 2 g / +/- 4 g / +/- 8 g / +/- 16 g; Gyro range: +/- of 250/500/1000/2000 /sec Packing List 1 x Module 2 x Pin header
FT232 USB to Serial Breakout Board - Black + Silver FT232 USB to Serial Breakout Board - Black + Silver Новинка

FT232 USB to Serial Breakout Board - Black + Silver

Model: FT232 - 3.3V & 5V power output - Easily connected to PC via mini USB cable - Great for DIY project
PL2303HX USB to TTL Converter Module PL2303HX USB to TTL Converter Module Новинка

PL2303HX USB to TTL Converter Module

Model PL2303HX Quantity 1 Color Blue Material Copper + plastic + PCB Features Genuine PL2303HX chipset; Over-current protection 500mA resettable fuse; 2 LED indicators; 3.3V and 5V connectors for different power supply condition Application For DIY project Packing List 1 x PL2303HX USB to TTL converter Manual: http://m5.img.dxcdn.com/CDDriver/CD/sku.149859.rar
Mini RS232 to TTL Converter Module Board (3~5V) Mini RS232 to TTL Converter Module Board (3~5V) Новинка

Mini RS232 to TTL Converter Module Board (3~5V)

Model N/A Quantity 1 Color Blue Material PCB Features RS232 to TTL converter Application A converter board for electrical levels Other Chip Mode: MAX3232CSE; Voltage Range: 3~5V; Max. Baud Rate: No more than 120kbps Packing List 1 x Converter
MinimOSD Ardupilot MEGA OSD w/ FTDI Burner (Supports MAVlink Protocol) MinimOSD Ardupilot MEGA OSD w/ FTDI Burner (Supports MAVlink Protocol) Новинка

MinimOSD Ardupilot MEGA OSD w/ FTDI Burner (Supports MAVlink Protocol)

Color: Blue - Material: PCB - MinimOSD supports ArduPilot MEGA and MAVLink Protocol - ATmega328P 8 bit microcontroller with an Arduino bootloader - MAX7456 monochrome on-screen display - Combine the two power and ground sections with solder jumper - FTDI cable compatible and 6-pin ISP header - +5V 500mA regulator for up to +12V supply input - Package includes: - 1 x MinimOSD board - 1 x FTDI burner - 1 x USB cable (30cm)
ElecFreaks E00395 XBee Shield with Logic Level Converter for Arduino ElecFreaks E00395 XBee Shield with Logic Level Converter for Arduino Новинка

ElecFreaks E00395 XBee Shield with Logic Level Converter for Arduino

XBee Shield with Logic Level Converter is an enhanced serial port XBee module breakout board.It can directly plug in with Arduino and use D0-D3 of the basic board to connect with the XBee module.Its SPI and UART bus is convert the logic level 5V to 3.3Vand it's stackable you can connect the 3.3V IO module or shield to this shield directly. The Logic Level Converter show in the below allowed your Arduino board connect to different IO logic level module safety. - With Logic Level Converter (3.3V to 5V or 1.8V to 5V or 1.8V to 3.3V) - With CC1101 module connecter - Provide maximal 800mA under 3.3V - 4 indicator LED (RSSI ASS Din Dout) for XBee - Switchable of communication with FTDI-USB /Base board - Full 2.54mm break out for XBee - With wireless program hardware interfaces - Reset button for base board - Stackable interfaces
USB to TTL Module STC SCM Download Board USB to TTL Module STC SCM Download Board Новинка

USB to TTL Module STC SCM Download Board

Model D1207001 Quantity 1 Color Blue Material FR4 PCB Features USB to TTL; Simple serial communication; Router or ADSL firmware upgrade; GPS serial communication; Hard disk firmware upgrade; Easy to use no need to convert with MAX232 Application Supports Windows 7 (32/64-bit); Short circuit and over current protection Packing List 1 x USB to TTL module
ZnDiy-BRY RC-05 CRIUS MWC Multiwii Bluetooth / Parameter Debugging Module w/ Dual Chips - Green ZnDiy-BRY RC-05 CRIUS MWC Multiwii Bluetooth / Parameter Debugging Module w/ Dual Chips - Green Новинка

ZnDiy-BRY RC-05 CRIUS MWC Multiwii Bluetooth / Parameter Debugging Module w/ Dual Chips - Green

Adopts UK's CSR Bluetooth slave module with high stability and stable signal; With regulated power supply can connect to UART TTL port of MWC directly easy to adjust parameters; Function: Read and adjust all PID parameters; Read and adjust AUX1/AUX2 Switch setting; Monitor remote controller signal and output control signal of flight controller board; Monitor signal between GPS output signal and Gyro acceleration meterpressure meter and other sensors; Calibrate magnetic resistance and acceleration sensor; Read and save MWC parameter via cellphone; Support screenshot; This Bluetooth module is compatible with all MWC flight controllers 328P flight control board connect UART serial port and Mega flight control board connect serial 0 Port; Support transparent data transfer function also can be used with other devices; LED State indicator: Green: Power supply indicator continuous lighting when power on; Red: Flashing indicates no connection continuous lighting indicates connect success; VVC voltage: 3.3V
RS232 To TTL Female Serial Max3232 To TTL Serial Module With Indicator Lamp RS232 To TTL Female Serial Max3232 To TTL Serial Module With Indicator Lamp Новинка

RS232 To TTL Female Serial Max3232 To TTL Serial Module With Indicator Lamp

RS232 To TTL Female Serial Max3232 To TTL Serial Module With Indicator Lamp
Waveshare NEO-7M GPS to TTL Module - Blue + White Waveshare NEO-7M GPS to TTL Module - Blue + White Новинка

Waveshare NEO-7M GPS to TTL Module - Blue + White

Adopts NEO-7M module with gain active antenna - TTL level compatible w/ 3.3 / 5V system - Baud rate: 9600 - With IPX interface can connect to various active antennas - With rechargeable battery can store data when power off - 56 channel GPS L1(1575.42Mhz) C/A code SBAS: WAAS / EGNOS / MSAS - Positioning accuracy: 2.5mCEP (SBAS:2.0mCEP) - Upgrade rate: Max. 10Hz (default 1Hz) - Capture time: cold start: 27s (max.) hot start: 1s - Capture sensitivity: -162dBm - Oscillator: TCXO (+/-0.5PPM) - Protocol: NMEA / UBX Binary - Working temperature: -40~85'C - Working voltage: 2.7~5V (VCC pin) - Working current: 35mA - TXD / RXD impedance: 510ohm - Suitable for GPS and quadcopter - Instruction (take MCU for example): VCC: connect to 3.3 / 5V; GND: connect to GND; TXD: connect to MCU.RX; RXD: connect to MCU.TX; PPS: connect to MCU.IO
USB to TTL CP2102 Serial Module - Red USB to TTL CP2102 Serial Module - Red Новинка

USB to TTL CP2102 Serial Module - Red

Suitable for STC download DVD / HDD / router / GPS upgrading; Adopts CP2102 chip of SILABS great performance; With port of RXD TXD RST 3.3V 5V DTR DCD RI RTS CTS; With 500mA fuse protecting computer USB from damage; With power indicator; Dupont cable is convenient and flexible to use; Transmitting speed: 115200bps; Output: 3.3V /5V
MaiTech CH340 Module / USB to TTL Converter Adapter Module - Black MaiTech CH340 Module / USB to TTL Converter Adapter Module - Black Новинка

MaiTech CH340 Module / USB to TTL Converter Adapter Module - Black

1. A new CH340G chips the chips are USB to TTL chips does not occur due to different drivers / different computer as a result of incompatibilities. 2. High-quality high-grade yellow pin and durable. 3. It is not only has the power light PWR there TXD and RXD indicator whether the product is easy to learn and intuitive to work in the absence of the instrument in the case; 4.3 V3 and 5V by a short circuit risk selection; 5. Supporting WINDOWS 98/ME/2000/XP/Server 2003/VISTA / Server 2008/Win7/Win8 32 bits / 64 Instructions for use 1. 3.3 V and 5V choice depending on the actual application environment using the system to select 3.3V 3.3V 5V 5V system of choice; 2. If the driver and wiring are right the module can not communicate properlyyou can swap RXD and TXD two lines to try; 3. The simplest module testing methods: TXD and RXD short circuit modules open the serial debugging tools just send something then the module as backhaul module no problem.
Waveshare U-BLOX NEO-6M GPS to TTL Board Module - Blue + White Waveshare U-BLOX NEO-6M GPS to TTL Board Module - Blue + White Новинка

Waveshare U-BLOX NEO-6M GPS to TTL Board Module - Blue + White

Adopts NEO-6M module with gain active antenna - TTL level compatible w/ 3.3V / 5V system - Baud rate: 9600 - With IPX interface can connect to various active antennas - With rechargeable battery can store data when power off - 50 channel GPS L1(1575.42Mhz) C/A code SBAS: WAAS / EGNOS / MSAS - Positioning accuracy: 2.5mCEP (SBAS:2.0mCEP) - Upgrade rate: Max. 5Hz (default 1Hz) - Capture time: cold start: 27s (max.) hot start: 1s - Capture sensitivity: -161dBm - Protocol: NMEA / UBX Binary - Working temperature: -40~85'C - Working voltage: 2.7~5V (VCC pin) - Working current: 45mA - TXD / RXD impedance: 510ohm - Suitable for GPS and quadcopter - Instruction (take MCU for example): VCC: connect to 3.3V / 5V; GND: connect to GND; TXD: connect to MCU.RX; RXD: connect to MCU.TX; PPS: connect to MCU.IO
1-Pin / 3-Pin Female to Female Dupont Line Connecting Cable for GPS / MWC / KK - White + Black + Red 1-Pin / 3-Pin Female to Female Dupont Line Connecting Cable for GPS / MWC / KK - White + Black + Red Новинка

1-Pin / 3-Pin Female to Female Dupont Line Connecting Cable for GPS / MWC / KK - White + Black + Red

1-pin / 3-pin DuPont line connecting cable for GPS / KK / MWC. It is used between controller and receiver.
FT232 USB to Serial Adapter Module - Green (DC 5V) FT232 USB to Serial Adapter Module - Green (DC 5V) Новинка

FT232 USB to Serial Adapter Module - Green (DC 5V)

Model FT232 Quantity 1 Color Green Material PCB board Specification 1 3.3V: 3.3V output; 2 GND: Power supply negative pole; 3 RXD: Serial data receive port; 4 TXD: Serial data transmit port; 5 5V: 5V input Features Transfer USB signal to serial signal; With LED indicator Application For DIY project Packing List 1 x USB to serial adapter module
3DR Radio Telemetry Kit With Case 433MHZ 915MHZ For MWC APM PX4 Pixhawk 3DR Radio Telemetry Kit With Case 433MHZ 915MHZ For MWC APM PX4 Pixhawk Новинка

3DR Radio Telemetry Kit With Case 433MHZ 915MHZ For MWC APM PX4 Pixhawk

3DR Radio Telemetry Kit With Case 433MHZ 915MHZ For MWC APM PX4 Pixhawk Ground station: Description: Item Name: 3DR Radio Telemetry Module Support to MWC / APM / PX4 / Pixhawk flight control Feature: Small size and light weight CP2102 high quality USB to TTL chips Alternatively 433MHZ or 915MHZ version Support MWC / APM / PX4 / Pixhawk other open source flight control Receiver sensitivity of -118 dBm The maximum transmit power 100mW MAVLink Framework Agreement Open Source Firmware Frequency hopping spread spectrum (FHSS) 2-way full-duplex communication adaptive TDM Up to 25% can be corrected bit errors Based Si1000 and Si4432 wireless microcontroller modules. Package Included: 1 x 3DR Radio Telemetry with the case 2 x cables (APM/PIX) 2 x 3.5dbi antennas
Mini USB 5V Power Supply Board Module for Arduino / DIY Project Mini USB 5V Power Supply Board Module for Arduino / DIY Project Новинка

Mini USB 5V Power Supply Board Module for Arduino / DIY Project

The module can provide 5V power for two sets of independent electronic building blocks module so that the two modules can be more easily connected together. For example the switch module output switching value (high or low level) and it can control the ON and OFF of the LED module. So the switch module connects to the mini-USB power input interface modules and the LED module connects to the corresponding output port and then connect the USB power supply the switch module is very easy to control the LED. Module features are as follows: 1. Can connect two sets of modules 2. USB interface for 4.5 ~ 5.5VDC power supply 3. Should be less than 500mA supply current 4. Standard 3-wire electronic building blocks interface easy to use 5. Four M2 screw mounting holes for easy installation
ZnDiy-BRY AIOPIO Input Output Module for CRIUS ALL IN ONE PRO V1.0/1.1/2.0 Flight Controller - Blue ZnDiy-BRY AIOPIO Input Output Module for CRIUS ALL IN ONE PRO V1.0/1.1/2.0 Flight Controller - Blue Новинка

ZnDiy-BRY AIOPIO Input Output Module for CRIUS ALL IN ONE PRO V1.0/1.1/2.0 Flight Controller - Blue

AIOPIO is the input/output module for CRIUS AIOP Flight Controller v1.0/1.1/2.0; You can use it to connect LEDs and others module to AIOP; 0.1 pitch standard port for serial 1/2/3 and LEDs; Analog port 0/1/2 for Airspeed and V&I Sensor; ULN2003A LED driver and 7 input/output; FrSky Telemetry output port; Reverse polarity protection for external power port; Select jumper for LED/Input power/FRSKY
SoaringE -Serial TTL Bluetooth Module Bluetooth Bee Master for Arduino SoaringE -Serial TTL Bluetooth Module Bluetooth Bee Master for Arduino Новинка

SoaringE -Serial TTL Bluetooth Module Bluetooth Bee Master for Arduino

Color Red Brand SoaringE Model E00306 Quantity 1 Piece Material FR4 English Manual / Spec No Other Features As we know TX and RX are LVTTL meaning 3.3V signals. But this module can directly connect to 5V TTL signals (take Arduino for example) without any problems and you don't need to worry any damages it will never happen it is therefore highly recommended to use transistors to interface with a 5V TTL signal. Specification Bluetooth protocol: Bluetooth Specification v2.1 + EDR USB protocol: USB v1.1/2.0 Frequency: 2.4GHz ISM band Modulation: GFSK (Gaussian Frequency Shift Keying) Transmit power: 4dBm Class 2 Sensitivity: -84dBm at 0.1% BER Rate: 2.1Mbps(Max)/160 kbps(Asynchronous);1Mbps/1Mbps(Synchronous) security features: Authentication and encryption Support profiles: Bluetooth serial port (master & slave) Power Supply: +3.3 VDC 50mA Operating temperature: -20 ~ +55 Centigrade Features Support Bluetooth standard v2.1 + EDR. Supports soft/hardware for master/slave mode setting. Through the AT command yon can set the control parameters of the module and issue orders to the module. Working state instructions. Suitable for embedded serial transmission wireless alternative. On-board efficient antenna. Support connecting seven slave equipment. Packing List 1 x TTL Serial Bluetooth module Bluetooth Bee master
1.0 LED MP3 Decoder Module Board w/ USB / Mini USB / SD / FM / Remote Control - Black (5V) 1.0 LED MP3 Decoder Module Board w/ USB / Mini USB / SD / FM / Remote Control - Black (5V) Новинка

1.0 LED MP3 Decoder Module Board w/ USB / Mini USB / SD / FM / Remote Control - Black (5V)

1.0 LED screen - Built-in MP3 decoder module - Supports USB flash drive disk up to 32GB - Supports SD / MMC card up to 32GB - FM frequency: 78.5~108MHz - With memory function - Composite amplifier - Working voltage: 5V - Great MP3 decoder module board for DIY project
1.0 LED MP3 Decoder Module Board w/ USB / Mini USB / SD / FM / Remote Control - Silver (5V) 1.0 LED MP3 Decoder Module Board w/ USB / Mini USB / SD / FM / Remote Control - Silver (5V) Новинка

1.0 LED MP3 Decoder Module Board w/ USB / Mini USB / SD / FM / Remote Control - Silver (5V)

1.0 LED screen; - Built-in MP3 decoder module; - Supports USB flash drive disk up to 32GB - Supports SD / MMC card up to 32GB - FM frequency: 78.5~108MHz - With memory function - Composite amplifier - Working voltage: 5V - Great MP3 decoder module board for DIY project

кешбака
Страницы:


Brand Crius Model V1.0 5V Quantity 1 Color Blue Material PCB Features The newest version Specification 6-Pin 3.3 5V Application MWC MultiWii Lite / SE English Manual/Spec N/A Other A product for Arduino that works with official Arduino boards. This is the newest revision of our FTDI BASIC; It now uses a SMD 6-pin header on the bottom which makes it smaller and more compact; Functionality has remained the same; This is a basic breakout board for the FTDI FT232RL USB to serial IC; The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards; It can also be used for general serial applications; The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable; The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded; This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button; This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector; The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable; The black wire on the FTDI cable is GND green is CTS; Use these BLK and GRN pins to align the FTDI basic board with your Arduino target; This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working; This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!); Our Arduino Pro boards and LilyPads use this type of connector; One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level); This board ship default to 5V but you can cut the default trace and add a solder jumper if you need to switch to 3.3V; Document: Windows 32/64 drive: http://www.ftdichip.com/Drivers/VCP.htm; 2. Arduino: http://arduino.cc/en/Main/Software; 3. the latest edition of MWC firmware and the configuration process: http://code.google.com/p/multiwii/downloads/list; 4. JAVA official website: http://java.com/zh_CN/download/manual.jsp?locale=zh_CN Packing List 1 x Module
Продажа crius ftdi basic breakout 5v usb to ttl 6 pin module for mwc multiwii lite se лучших цены всего мира
Посредством этого сайта магазина - каталога товаров мы очень легко осуществляем продажу crius ftdi basic breakout 5v usb to ttl 6 pin module for mwc multiwii lite se у одного из интернет-магазинов проверенных фирм. Определитесь с вашими предпочтениями один интернет-магазин, с лучшей ценой продукта. Прочитав рекомендации по продаже crius ftdi basic breakout 5v usb to ttl 6 pin module for mwc multiwii lite se легко охарактеризовать производителя как превосходную и доступную фирму.